Saturday, 21 July 2012

E21 316: Filling the rest of the Dents.

There weren't many more body blemishes to be fair, just a couple down the driver's side you could barely see [invisible on the pics], but worth flatting out for the respray while the bonnet was being done.


The rub down reveals how small these pin dents were and metal had been pushed in slightly over an area of a about 2" round.
Two quick skims of Isopon P38 body-filler and a rub down with 180-grit paper on a flat block, then P600 Wet/Dry - not going mad here.


A coat of filler-primer and it's back to factory-flat. Ok, so you could barely see them in the first place, but at least I know they're gone.





Also needing the merest attention was this tiny patch of rust bubbles on the o/s bonnet corner, worth mentioning because it's the only one I found on the car, where on my 1995 318i I could have pointed out half a dozen without trying. A quick rub and one blob of filler was all it needed.

No comments:

Post a comment