Saturday, 23 February 2013

E21 316: Arch Rolling - First Test.


ET Plus complete arch-rolling kit was about £100 on eBay and comes with a full set of spigot rings to fir anything.


Hard to see in the pic, but quite a bit of scrubbing on the tyre and a faint red line all the way around the sidewall from the sharp-edged lip, below.



Rolling-tool bolts on to the hub, winds out against the arch and you're away, rolling it back and forth, winding it out a little more each time. This was insanely easy compared to what I was expecting. 


I managed to roll the sharp lip up almost flush and gave the rim of the arch a slight flare in about 15 minutes flat. No more scrubbage for now, even if the look hasn't changed much.


It's best to use a heat-gun to warm the paint so it doesn't crack, but without one to hand I figured hot water would do the trick. A bit of loose paint still flaked off from under the arch, but it looks like I'm already beginning to get rusty bubbles under the rim of all four arches and they will probably have erupted by summer. The n/s arch also consists of a fair bit of primer, so it'll be interesting to see how neatly that rolls out and I'll ask my paint guy how much smoothing and spraying all the arches will be with my left over paint. 

No comments:

Post a comment