E30 318i M40: Bosch injectors and tips - checking condition

Next on the agenda to find the culprit of the rough running and stalling idle was to examine the injector condition and the plastic tips. The injector bodies are quite rusty and corroded so they could well be the original set, but on closer inspection the tips are fine and they look to be in pretty good condition, so onwards.

To inspect the injectors the lower inlet manifold will need to be removed, which involves de-plumbing the fuel lines and some of the water hoses. 

E30 318i M40: Camshaft and valve condition

I whipped the rocker cover off to check if there was a dropped valve or broken spring that might be contributing to the poorly idle, but no such defect found. In fact, this has to be one of the cleanest top ends I have ever seen. Nice!

BMW M40 Engine - how to check timing, where the marks are located

This must be one of the hardest bits of info to find in the whole world of BMW, but there is a great post on BMW Werks on how to do it [https://www.bimmerwerkz.com/threads/m40-motor-timing-info.59059/].

QUICK TIMING CHECK GUIDE:

** Only if crank pulley has NOT been separated from crankshaft! **

1. Remove the distributor / timing cover at the front of the engine.

2. Check the timing mark on the crank pulley. This is an arrow cast into the block which should line up with the sprocket tooth to the right of the gap in the teeth, as in pic below.

3. Check the timing mark on the camshaft pulley. This is a notch/line mark in the pulley and should line up with the right-angle notch in the cylinder head, as in pic below. If this looks good, your timing is fine.

Thanks again to xdrian on BMW Works for making these pics and sharing this secret!