E46 Clubsport: Loss of coolant... split radiator!

The Clubsport is starting to become a bit 'whatever next' lately. Amidst the other post new year jobs I forgot to mention the coolant expansion-tank that sits next to the radiator had swelled and split down one side, so a new one was duly fitted.

Last week the sudden loss of coolant returned, with the puddle in the same place under the radiator, but no visible sign of a leak. Nath assumed it to be the radiator-cap, so we pressure tested it in work and it's fine. Then we pressurised the rest of the cooling system and this is what we found - the radiator has burst along the top. A new radiator is going straight in, but the fact remains that something is still pressurising the cooling system and needs to get sorted.

E46 Clubsport: Quick rev and exhaust burble...

Quick rev of the CS as we stave off real work by fiddling with Beemers. It finally has that proper vanos whoosh and exhaust note, though there is still a bit of a misfire / bogging down under acceleration and no fault codes are coming up on Autocom GDP, but DIS will find something and I will post the results. Shame, as this is delaying that front bumper splitter...

E46 Clubsport: Nathan's split rubber + other issues.

More big spending as the Clubsport gets back on the road with a new MOT, starting with 4 new Maxxis tyres for the refurbed split-rims. It's been running a bit rough, but as he started it for the first time in a month it ran a bit worse and began producing a lot of white / blue smoke from the exhaust. Fearing the head-gasket he started dismantling and found it was just one of the profile-gaskets in the rocker-cover [16 in the bottom diagram] was split and hadn't seated in the head properly the last time it was replaced and was allowing oil to spill down into the chamber and was causing the smoke. This, he assures us, is a common problem in 6-cylinder BMW petrols and had nothing to do with any 'engine-weld' products he may have also added. Never the less, with a new rubber-gasket the smoke has ceased. During the job he found the rubber intake hose was also split in two places, clearly contributing to the lack of smooth acceleration suffered since he got it, so he treated the 330 to a new one of these as well.

The MOT threw up borderline high emissions, which was waved, and both front lower ball-joints were knackered. These are usually replaced as a whole control-arm, so that's what was done and finally the Clubsport is back on the road, looking and sounding as it should with better pull and a really raspy vanos exhaust note. Next up comes replacing the lower bumper splitter sorely missing from the front end.

E46 Clubsport: New split-rims!

Oh yes... it's time the 330CS had some money lavished on it and what better way to start than new wheels. They are the same set of Italian-made Cromodora 18x8 and 18x8.5 2-piece split-rims that come with the car. He still has the old ones, but after 2 failed attempts to refurbish them he's been keeping an eye out for a replacement set, which aren't common. Finally some have shown up and been quickly snaffled for £ delivered. They've been sandblasted back to bare metal, then lacquered and the colour / finish is very nice indeed. Awesome.

Also, a rubber rocker-cover gasket to signify the start of the engine tweaks. Lots more to come...