F10: Centre-console / Arm-rest / iDrive-panel Replacement

The centre ash-tray had been replaced with an aluminium plate for the Police-light switches and stuff, so that needed replacing. The centre-console itself, apart from being black vinyl, which would never do, had holes drilled both sides to mount the Police radio / scanner. There was also blobs of glue all down one side, so after a brief attempt at titivating the damage, I decided a whole new one would be necessary and gave a welcome change up to a leather arm-rest!

E36 Compact: E46 Driver's Arm-Rest Retrofit

Just as on E46, the two bolts holding the handbrake down hold the right side of the arm-rest bracket. The third threaded-hole is covered by putty a bit further down the left side of the trans-tunnel.

The three existing holes fit the E46 arm-rest bracket, longer 13mm bolts and shims perfectly.

The rear roll-down ash-tray trim screws to the rear of the arm-rest bracket.

The centre-console trim took a bit of getting in under the gearstick trim panel, but fits the rear and arm-rest pretty well.

As does the handbrake handle and leather gaiter. Just deciding now whether to retrofit the gearstick trim panel and window-switches from the E46, or cut the centre-console trim to fit the E36 better. Hmm.